Nokia 2128i - Manual (Page 57)

V o i c e
56
Voice tags
After you have associated a voice tag to a contact, in the standby mode,
select
Menu > Voice > Voice tags > Options > Playback , Change , or Delete .
■ Voice commands
Set as many as five voice commands, to allow hands-free operation of certain
device features.
Assign a voice tag to a command
Before using voice commands, you must first add a voice tag to the device function.
1. In the standby mode, select Menu > Voice > Voice commands .
2. Select the device function you wish to tag: Profiles , Voice mailbox , Voice recorder ,
or Call log .
3. If necessary, scroll to an option associated with that function, and select
Options > Add command .
4. Select Start , and speak the voice tag clearly into the microphone.
Note: Do not select Quit unless you want to cancel the recording.
The device replays and saves the recorded tag. appears next to commands
that have voice tags assigned.
Activate a voice command
After you have associated a voice tag with a device function, you can issue a
command by speaking the voice tag.
1. Select and hold Contacts .
2. When Speak now is displayed, pronounce the voice tag clearly into
the microphone.
When the device finds the voice tag, Found: is displayed, and the device plays the
recognized voice tag through the earpiece. The function you requested is activated.
Options
After you have associated a voice tag to a command, you can choose one of the
following options. In the standby mode, select
Menu > Voice > Voice commands >
Options > Playback , Change , or Delete .
2128i.ENv1a_BIL_9240270.fm Page 56 Wednesday, February 8, 2006 10:05 AM