Nokia 2128i - Manual (Page 48)

S e t t i n g s
47
1. Connect the HDA-10 headset adapter to the connector on the bottom of
the device.
2. Connect one end of the cable to the TTY/TDD device.
3. Insert the other end of the cable into the headset jack on the HDA-10
headset adapter.
4. In the standby mode, select Menu > Settings > Enhancement settings > TTY/
TDD > Use TTY > Yes .
TTY/TDD calls
Important: Some manufacturers of TTY/TDD devices suggest that the
device be at least 18 inches from the TTY/TDD device. When connecting
to any other device, read its user guide or contact its manufacturer for
detailed instructions and safety information.
• Check with the manufacturer of the TTY/TDD device for a connecting cable
that is compatible with the Nokia device.
• TTY/TDD communications depend on network availability. Check with your
service provider for availability and description of services.
Make a call
1. In the standby mode, enter the number, and press the send key.
2. When the receiving party answers, begin typing your conversation on the TTY/TDD.
3. Press the end key to end the call.
Receive a call
1. Make sure the TTY/TDD device is connected to your device.
2. Press the send key to answer the call, and type your responses on the TTY/TDD.
3. Press the end key to end the call.
Charger
In the standby mode, select Menu > Settings > Enhancement settings > Charger ,
and one of the following options:
Default profile —Choose the profile you wish to be automatically activated when
your device is connected to the charger.
Lights —Choose to keep the device lights always on or to shut off automatically
after several seconds. Select On or Automatic .
2128i.ENv1a_BIL_9240270.fm Page 47 Wednesday, February 8, 2006 10:05 AM