Nokia 2128i - Manual (Page 35)

M e s s a g e s
34
7. Enter any dialing codes as necessary using the information that you wrote
down from "Insert dialing codes," p. 34.
If you pause for 5 seconds after connecting to voice mail, enter p twice after
the voice mailbox number; for example, 2145551212pp.
8. Enter any remaining pauses or other information that allows you to listen to
your messages, and select OK .
9. Enter a name (such as voice mail), and select OK .
To dial and listen to your voice mail, in the standby mode, press and hold the
assigned 1-touch dialing key.
Insert dialing codes
Press * repeatedly to cycle through the dialing codes. Once the desired code
appears in the display, pause briefly. The code is inserted into the dialing string.
The following dialing codes are available:
* — Bypasses a set of instructions
+ — International prefix
p — Pauses for 2.5 seconds before sending the numbers that follow
w — Waits for you to press the send key before sending the numbers or codes
that follow
2128i.ENv1a_BIL_9240270.fm Page 34 Wednesday, February 8, 2006 10:05 AM