Nokia 2128i - Manual (Page 40)

S e t t i n g s
39
Automatic redial
Occasionally, your network may experience heavy traffic, which results in a fast
busy signal when you dial. With automatic redial activated, your phone redials
the number up to three times, and notifies you once the network is available.
In the standby mode, select Menu > Settings > Call settings > Automatic redial >
On or Off .
1-touch dialing
To activate or deactivate 1-touch dialing. In the standby mode, select Menu >
Settings > Call settings > 1-touch dialing > On or Off . See "Set up 1-touch
dialing," p. 23.
Automatic update of service
Your phone can receive updates to wireless services sent to your phone by your
service provider. This option is a network service.
Calling cards
If you use a calling card for long distance calls, save the calling card number in
your phone. The phone can store up to four calling cards. Contact your calling
card company for more information.
Save information
1. In the standby mode, select Menu > Settings > Call settings > Calling card .
2. Enter your security code, and select OK . See "Security settings," p. 48.
3. Scroll to the calling card of your choice, select Options > Select > OK .
4. Select one of the following sequence types:
Access no. + phone no. + card no. —Dial the 1-800 access number, phone
number, then enter the card number (plus PIN if required).
Access no. + card no. + phone no. —Dial the 1-800 access number, card
number (plus PIN if required), then enter the phone number.
Prefix + phone no. + card no. —Dial the prefix (numbers that must precede
the phone number) and phone number, then enter the card number
(plus PIN if required).
5. Enter the required information (access number or prefix and card number),
and select OK to confirm your entries.
6. Select Card name > enter the card name > OK .
2128i.ENv1a_BIL_9240270.fm Page 39 Wednesday, February 8, 2006 10:05 AM