Nokia 2128i - Manual (Page 49)

S e t t i n g s
48
■ Security settings
When first accessing the security settings, enter the preset lock code. By default,
this is the last four digits of your phone number. Your wireless service provider,
may preset the lock code to a four-digit number such as 1234 or 0000. If these
numbers do not work, contact your wireless service provider.
Activate or deactivate phone lock
The phone lock feature protects your device from unauthorized outgoing calls or
unauthorized access to information stored in the device.
To activate or deactivate the phone lock setting on your device:
1. In the standby mode, select Menu > Settings > Security settings .
2. Enter the lock code, and select OK . See "Change lock code," p. 49.
3. Select Phone lock and one of the following options:
• Off —Immediately turns off the phone lock feature.
• Lock now —immediately turns on the phone lock feature.
• On power-up —Turns on the phone lock feature after power on.
If you selected Lock now , you are prompted to enter your lock code when you
select menu or the left softkey. When the lock code has been entered, phone lock
deactivates and your device functions normally.
When phone lock is activated, Phone locked is displayed each time you turn your
device on or off.
When the device is locked, calls still may be possible to the official emergency
number programmed into your device.
Call not allowed is displayed if you attempt to place a call while your device is
locked. To answer a call with phone lock on, select Answer , or press the send key.
Allow numbers when phone locked
When phone lock is on, the only outgoing calls that can be made are to the
emergency number programmed into your device (for example, 911) or the
numbers stored in the
Allowed no. when phone locked location.
To add a number to the allowed list:
1. In the standby mode, select Menu > Settings > Security settings .
2. Enter the lock code and select OK . See "Security settings," p. 48.
3. Select Allowed no. when phone locked . Highlight an empty location, select
Assign, and enter the phone number; or select Assign > Search to recall the
number from Contacts . Select OK .
2128i.ENv1a_BIL_9240270.fm Page 48 Wednesday, February 8, 2006 10:05 AM