Nokia 2128i - Manual (Page 56)

V o i c e
55
11. Voice
■ Voice tag dialing
You can dial up to 25 stored numbers using voice tag dialing.
Before using voice tags, note that:
• Voice tags are not language-dependent. They are dependent on the
speaker's voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags, and use them
in a quiet environment.
• Very short names are not accepted. Use long names and avoid similar names
for different numbers.
Note: The use of voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing in
all circumstances.
Assign a voice tag
Before you use voice dialing, assign a voice tag to the number.
1. In the standby mode, scroll down to enter the contacts list.
2. Highlight the contact to assign a voice tag, select Details > Options >
Add voice tag > Start .
3. Speak clearly into the microphone. Do not select Quit unless you want to
cancel the recording.
The device replays and then saves the recorded tag. The icon appears next to
commands that have voice tags assigned.
If the recording is not successful, your device displays Voice system error .
Select Options > Add voice tag , and repeat Step 3.
Dial a number
In the standby mode, select and hold Contacts . When you hear several beeps,
Speak now is displayed. Release Contacts . Pronounce the voice tag clearly into
the microphone.
When the device finds the voice tag, Found: is displayed, and the device automatically
dials the number. If the device does not locate a number or recognize the voice tag,
No match found is displayed.
2128i.ENv1a_BIL_9240270.fm Page 55 Wednesday, February 8, 2006 10:05 AM