NETGEAR ProSafe FVS124G User Manual
Page 8

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
-2
202-10085-01, March 2005
Inbound Traffic to Single WAN Port (Reference Case) ............................................3-3
Inbound Traffic: Dual WAN Ports for Improved Reliability .................................3-4
Inbound Traffic: Dual WAN Ports for Load Balancing ........................................3-4
VPN Road Warrior: Single Gateway WAN Port (Reference Case) ....................3-6
VPN Road Warrior: Dual Gateway WAN Ports for Improved Reliability ............3-7
VPN Road Warrior: Dual Gateway WAN Ports for Load Balancing ...................3-8
VPN Gateway-to-Gateway: Single Gateway WAN Ports (Reference Case) .....3-9
VPN Gateway-to-Gateway: Dual Gateway WAN Ports for Improved Reliability 3-10
VPN Gateway-to-Gateway: Dual Gateway WAN Ports for Load Balancing .... 3-11
VPN Telecommuter (Client-to-Gateway Through a NAT Router) ...........................3-12
VPN Telecommuter: Single Gateway WAN Port (Reference Case) ................3-12
VPN Telecommuter: Dual Gateway WAN Ports for Improved Reliability .........3-13
VPN Telecommuter: Dual Gateway WAN Ports for Load Balancing ...............3-14
Connecting the FVS124G to the Internet
Cabling and Computer Hardware Requirements .....................................................4-3
Computer Network Configuration Requirements .....................................................4-3
Where Do I Get the Internet Configuration Parameters? .........................................4-4
Connecting the FVS124G ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
4-6
Step 1: Physically Connect the VPN Firewall to Your Network (Required) ..............4-7
Step 3: Configure the Internet Connections to Your ISPs (Required) ......................4-8
Manually Configuring Your Internet Connection ..............................................4-12
Programming the Traffic Meter (if Desired) .....................................................4-13
Step 4: Configure the WAN Mode (Required for Dual WAN) .................................4-15