NETGEAR ProSafe FVS124G - Manual (Page 28)

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
2-10 Introduction
202-10085-01, March 2005
Figure 2-4: Login screen on the Web browser
Note: Read-only access is provided by logging in as username guest and default password
password.
Default Factory Settings
When you first receive your FVS124G, the default factory settings will be set as shown in
Table 2-1 below. You can restore these defaults with the Factory Defaults restore switch on the
front panel — see “The Router’s Front Panel” on page 2-6 .
• Pressing this switch until the TEST LED blinks (approximately 10 seconds) causes the
firewall to restore all factory default settings and reboot.
• A shorter press and release causes the firewall to merely reboot.