beautypg.com

Configuring lan tcp/ip setup parameters, Configuring lan tcp/ip setup parameters -2 – NETGEAR ProSafe FVS124G User Manual

Page 70

background image

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports

5-2

LAN Configuration

202-10085-01, March 2005

Figure 5-1: LAN IP Setup menu

Configuring LAN TCP/IP Setup Parameters

LAN TCP/IP Setup—The default values are suitable for most users and situations. These are
advanced settings that you may configure if you are a network administrator. RIP is applicable if
your network contains multiple routers.

•

IP Address: Type the IP address of your router (factory default: 192.168.1.1).

Note: Once you have completed the LAN IP setup, all outbound traffic is allowed and all
inbound traffic is discarded. To change these traffic rules, refer to

Chapter 6, “Firewall

Protection and Content Filtering

.

See also other documents in the category NETGEAR Hardware: