NETGEAR ADSL2+ Modem Router DM111PSPv2 - Manual (Page 49)

4-1
v1.0, December 2008
Chapter 4
Advanced Configuration
This chapter describes how to perform advanced configuration for you ADSL2+ Modem Router
DM111PSPv2. For Advanced firewall settings, see
Chapter 3, “Security and Firewall Protection .”
For advanced WAN settings, see Chapter 5, “Advanced WAN Configuration .” To use the features
described in this chapter, log in to the modem router as described in “Logging In to the Modem
Router” on page 1-2 .
This chapter includes:
• “LAN IP Setup ” in the following section
• “Static Routes” on page 4-5
• “IGMP Proxy” on page 4-7
• “Internet Time Settings” on page 4-8
• “Enabling VoIP Connections” on page 4-9
LAN IP Setup
If you intend to connect your modem router to a router, configure the local area network Internet
Protocol (LAN IP) settings, as follows:
1. In the Advanced section of the main menu, select LAN IP Setup. The LAN IP Setup screen
displays as shown in Figure 4-1 on page 4-2 .