NEC DS1000 - Manual (Page 44)

● Wrap-up Timer Display
After hanging up a timed call, your display will show the
Call Timer data for 6 seconds before returning to idle. This
gives you time to make a record of the timed call.
To time your outside call if you have an Automatic Call
Timer key:
1. Place or answer outside call.
– The Call Timer starts automatically. The Automatic Call
timer key lights red while the system times the call.
To manually time your Intercom or outside call:
1. While placing or while on the call, press the Manual or
Automatic Call Timer key.
– The Call Timer key lights red while the system times
the call.
OR
1. Press your or soft key.
To stop the Call Timer:
1. Hang up.
- The timer automatically stops after 6 seconds.
OR
1. Press the Manual or Automatic Call Timer key.
To reset the Call Timer to 00:00:00 while it is running (i.e.,
timing your call):
1. Press .
TIMER TIME
Call Timer
36
80000mfh08-01.qxd 12/10/04 3:20 PM Page 36