NEC DS1000 - Manual (Page 147)

You can customize your exten-
sion’s name. When you place an
Intercom call, the name you enter
shows on your co-worker’s dis-
play. If you are an attendant, you may also be able to program a
co-worker’s name as well as the name for a ring Group or UCD
Hunting Group. Check with your Communications Manager.
To program your extension’s name:
1. At a 22- or 34-Button Display Telephone:
Press + + + .
At a Super Display Telephone:
Press + .
2. Follow the instructions in the Name Programming chart
on the next page.
3. Press + to exit.
To program a name for a co-worker’s extension:
You must have Access Level 4 or 5 to do this.
1. At a 22- or 34-Button Display Telephone:
Press + + + .
At a Super Display Telephone:
Press + .
2. When you see EXT:3xx , enter the number of the exten-
sion you want to program + HOLD .
You can optionally enter a Ring Group or UCD
Group master number to program the name of the
associated group.
NAME PROGRAM
NAME MORE MORE PGM
NAME PROGRAM
NAME MORE MORE PGM
Name Programming
139
Program your extension’s
name from your telephone.
80000mfh08-01.qxd 12/10/04 3:20 PM Page 139