Call forwarding off premise – NEC DS1000 User Manual
Page 31
5.
If you press
to store the number in a Speed Dial
bin, you see:
– Select the Speed Dial bin (dial 701-720 or press the bin
key) you want to use +
HOLD
to exit.
OR
If you press
to store a new number (automati-
cally in Speed Dial bin 720), you see:
– Enter the line number (e.g., 1 for line 1), line group
number (e.g., 90 for group 0), or
ICM
to store Intercom
codes +
HOLD
. (Check with your Communications
Manager for your line and line group numbers.)
– Following Speed Dial programming methods, enter the
number you want to store (up to 16 digits long, includ-
ing
MIC
to store a pause and
FLASH
to store a Flash) +
HOLD
to exit.
– You cannot enter a name using this option.
– If you already have a number stored in bin 20, you see:
– Press
to enter a new number or
to
back up to step 4.
OR
NO
YES
NUM
BIN
Call Forwarding Off Premise
23
80000mfh08-01.qxd 12/10/04 3:20 PM Page 23