NETGEAR XE104 - Manual (Page 20)

XE104 User Guide
3-6 Installing the XE104 Wall-Plugged Ethernet Switch
v1.0, September 2005
1. Insert the XE104 Resource CD into one of the CD-ROM drives on the computer that is
connected to your router 1 . The CD should start automatically. The following screen should be
displayed.
If the CD does not start automatically:
• Go to My Computer on the Windows Start menu, and double-click the drive that
represents the location of the XE104 Resource CD or
• Select the CD-ROM drive and click on the Autorun.exe executable file.
1. All devices on a PowerLine network can be managed from one computer. If you add another XE104 device
to an existing PowerLine network, you can install the PowerLine encryption utility on the computer
connected locally to the new XE104 device or on the computer originally used to set up the PowerLine
network password. You can use any computer to manage the network, but this procedure assumes that you are
working from the computer that is connected to your router.
Figure 3-5