Nintendo Wii - Manual (Page 28)

Do you have a high-speed
(broadband) Internet
connection, such as cable
or DSL?
You can easily connect the Wii system
to the Internet if you already own a
Nintendo Wi-Fi USB Connector.
If you don't have a wireless network but
instead have a wired local-area network, you
can connect Wii to the network with a Wii LAN
Adapter. (Sold separately, may be ordered
through Nintendo’s web site at
www.nintendo.com (USA/Canada only) or by
calling Customer Service at 1-800-255-3700.)
You must use Internet Setup to
search for your wireless access point.
Is your network
environment WIRED?
Is your network
environment WIRELESS?
You can't yet connect
your Wii to the Internet.
Find out what you need
to get started.
Do you have a PC
running Windows® XP
or Windows Vista®
directly connected to
your high-speed
Internet connection?
NO NO
NO
YES
YES
YES
YES
p. 61
pp 54-55 p. 56
p. 58
AOSS access point - p. 60
52 53
W i i S e tt i n g s a n d D at a M a n a g e m e n t
Wii Set
tings and Data Management
Wii Set
tings and Data Management
Internet
You'll want to set up your Wii's Internet settings to work well with your home's
Internet connection, whether you have a wireless broadband network or want to
connect directly to your wired LAN network.
NOTE: When you connect the Wii to the Internet, the console's internal files will
sometimes be automatically updated.
When you select Internet from the Wii Settings screen, you'll go straight to the
Internet Setup screen. Before you proceed with setup selections, consult the
following flowchart to determine what settings and equipment would work well
with your home Internet environment.
Sensitivity
Use this feature to adjust the sensitivity of the Pointer function of the Wii Remote.
If you find that you're not getting an optimal pointing experience with the Wii
Remote, you may want to adjust this setting.
After you select Sensitivity from the Sensor Bar settings screen, you'll see an
explanation screen that further details the Sensitivity setting. Select OK to begin the
adjustment test.
In the test, you'll use the Wii Remote
Pointer to move a cursor into view within
the test field. If you see two blinking dots,
your current Sensitivity setting is working
fine. If you don't see two blinking dots,
adjust the Sensitivity with the + and -
Buttons until you do, then press the A
Button to confirm your new setting.
• If you see three or more dots, the Wii Remote may be sensing an extra light source.
See Wii Remote troubleshooting, page 34, in the Wii Operations Manual - System
Setup.
NOTE: The initial recommended distance for using the Wii Remote Pointer is 3 to 10
feet from the Sensor Bar. By increasing the Sensitivity setting, you'll increase the
distance at which you can use the Pointer. Also note that the influence of direct
sunlight and various light sources can make the Pointer operation less optimal.
Sensor Bar
When positioning the Sensor Bar, you may need to adjust two key settings. Select
Sensor Bar Position or Sensitivity, then proceed with the following instructions.
Sensor Bar Position
You'll want to adjust this setting to match where you've placed your Wii's Sensor Bar:
above or below your TV screen. Confirm your selection once it's complete.
Wii Channel Manual
148Hx210W