Nikon 9000ED - Manual (Page 67)

58
2 Insert fi lm
Place fi lm in the holder base up (
26).
Align the fi rst frame in each strip with an
aperture at the left end of the holder.
Use Only One Type of Film
Do not place negatives in the holder with
positive fi lm.
41
42
43
44
45
•
•
•
•
21
22
23
24
25
•
1
2
3
4
5
•
•
•
FH-816 Holder for 16-mm Film FH-816 Holder for 16-mm Film
The FH-816 is used to scan up to three strips of 16-mm fi lm. Each strip can be from one to
twenty frames in length.
Inserting Film
1 Open the holder
Insert your fi ngers through the holes in
the bottom half of the holder and undo
the latches, then open the holder.
Latches
Inserting Film and Masking Sheets
Do not place fi lm or masking sheets so that they protrude from the holder or overlap the fi lm guides.
Failure to observe this precaution may cause the holder to jam in the scanner.
Digital ROC, Digital GEM, and Digital DEE ( 50)
These functions can not be used with 16-mm fi lm.
Direction of
insertion
Arrow