Nikon 9000ED - Manual (Page 38)

29
2 Flatten the fi lm
Place your fi ngers on the grips and slide them gently outwards.
Do not use force. To prevent the fi lm from sliding out of position,
press the holder cover lightly before sliding the grips.
3 Latch the movable base
Slide the latch in the direction shown.
Scanning Curled Film
Curl of 10 mm or less can be removed as follows:
1 Unlatch the movable base
Slide the latch in the direction shown.
Inserting Film
Use only one type of fi lm; do not place negatives in the holder with positive fi lm.
Be sure the end of the fi lm is fl ush with the stops. A gap between fi lm and stop
could interfere with accurate color reproduction.
2.3
Close the holder
Close the holder, pressing the covers
down until they latch.
Film with a curl of more than 10 mm can not be scanned in the FH-869S. Use the optional FH-869G
glass-covered fi lm holder or the optional FH-869GR glass-covered rotating fi lm holder (
54, 56).