Nortel Networks T7406 - Manual (Page 37)

Chapter 3 Using the Handset Display Buttons 37
T7406 Cordless Handset Installation Guide
To cancel Mute, press the Options button again.
Mute only works on the current call. If a second call comes in, and you want to mute that call,
answer the call and press the Options/Mute button on the side of the handset.
Page
You can use the T7406 cordless handset to make a page announcement.
The handset does not have a loudspeaker so it cannot be paged.
To make a page announcement:
1 Press ≤fl‚ and SETS , SPKR or BOTH to make a General page
The announcement is made over telephone and/or external speakers to all telephones in system
that can receive Pages.
• Press ≤fl⁄ to make an Internal page.
The announcement is made over the telephone speakers of all telephones in the system that can
receive pages.
• Press ≤fl¤ to make an External page.
The announcement is made through external speakers.
• Press ≤fl‹ to make an Internal/External page.
The announcement is made over both the telephone speakers and the external speakers.
2 Press ® to end the page announcement.
Customize a handset
You can customize some of the handset features according your preferences.
To customize your handset, use the Options button to access the Options list. Use the display
buttons on the handset to navigate through the Options list to find the settings you want. Refer to
“Setting Handset Features” on page 21 .
Backlight On/Off
Your handset display has a backlight that is helpful in low light conditions.
To activate the backlight, press any button on the dialpad.
Note: While Mute is active, if you press any button on the face of the handset, the
display will clear, but Mute will remain active. To turn off Mute, press the
Options/Mute button on the side of the handset.
Note: The battery talk time is reduced with the continuous use of the backlight.
The backlight automatically turns off if the handset is idle for more than five
seconds.