Nortel Networks T7406 - Manual (Page 34)

34 Chapter 3 Using the Handset Display Buttons
NN40110-300 NN40110-300
Features
To program a feature memory button:
1 Press ≤•‹.
2 Press a memory button.
3 Press ≤ and enter the feature code.
4 Press OK to store the feature code.
5 Label the button.
Refer to “System Feature codes” on page 34 for a list of the most common features. Your system
administrator can also provide a list of all the feature codes that are available.
Erase memory buttons
To erase a memory button:
1 Press ≤•⁄.
2 Press the memory button you want to erase.
3 Press OK to erase the button.
Button Inquiry
Use the Button Inquiry feature to determine what is programmed on the memory buttons on your
handset.
To use the Button Inquiry feature from the handset:
1 Press ≤•‚.
2 Press the button(s) you want to check, and read the display.
3 Press ≤ or ® when you are finished.
System Feature codes
Contact your System Coordinator for information about all the feature codes that are available on
your system and how they operate.
Some of the most common Feature codes are:
Button inquiry ≤•‚
Call Forward ≤›
Conference ≤‹
Do Not Disturb ≤°fi
Last Number Redial ≤fi