Nortel Networks T7406 - Manual (Page 22)

22 Chapter 1 About your T7406 Phone
NN40110-300 NN40110-300
Ringer Volume
You can assign the ringer volume level for the handset. The ringer volume level assignment also
affects the listening volume level.
To assign the ringer volume:
1 Press the Options button.
2 Press SHOW .
3 Press NEXT until the display shows 2. Ringer Volume .
4 Press SHOW . The display shows Press Volume Bar .
5 Press the volume bar on the left side of the handset. There are three ring volumes.
6 Press OK . The display shows 2. Ringer Volume .
7 Press the Options button to exit the Option menu.
The display changes to show the date and time.
Lock Handset
You can lock the buttons on the handset to prevent unintentional dialpad or button presses.
To assign the Lock Handset feature:
1 Press the Options button.
2 Press SHOW .
3 Press NEXT until:
The display shows 3. Lock Handset .
4 Press OK to lock the handset.
The display shows Handset Locked .
5 Press the Options button to exit the Option menu.
The display changes to show the date and time.
To release the Handset Locked state, press the ® button, then press • .
Lock Handset notes:
• An incoming call will automatically release the handset from Handset Lock mode.
• The handset cannot be locked while you are on a call.
Language
≤•fi‚⁄
Select the Primary Language for the display.
≤•fi‚¤
Select the Alternate Language 1 for the display.
≤•fi‚‹