Nortel Networks T7406 - Manual (Page 36)

36 Chapter 3 Using the Handset Display Buttons
NN40110-300 NN40110-300
Make and Answer Calls
This section provides a brief overview of how you use the handset to make and answer calls.
Make a call
Use intercom and extension buttons to make internal calls. See your System Coordinator for a list
of numbers.
To make a call:
1 Press an intercom or line button.
2 After the button lights, enter your system external line access code or line pool access code.
3 Dial a number.
4 Press ® to end the call.
Answer calls
When your telephone rings while you are on a call, you hear a beep tone through the receiver,
unless DND on Busy has been set to Yes in the telephone system programming. In this case, only
the indicator light on your handset will indicate that another call is coming in.
To answer a call:
1 Press the flashing red button.
2 Press ® to end the call.
Hold calls
To retrieve a held call, press the button where the call is on hold. Calls are automatically placed on
hold when you switch from one line to another.
To hold a call:
1 Press ≥ while on a call. The line button flashes.
2 Press the flashing button to retrieve a held call.
3 Press ® to end the call.
Mute microphone
To mute the microphone while you are on a call, press the Options button.
Note: When the Options list is active, press the flashing red button to answer an
incoming call.