NETGEAR GA311 User Manual

Page 43

Text mode
Original mode

NETGEAR 10/100/1000 Mbps Gigabit Ethernet Adapter GA311 User Manual

B-5

v1.0, February 2007

Install the GA311 Gigabit Ethernet Adapter.

Locate an available PCI slot in your
computer.

Insert the card into the PCI expansion
slot.

Note: To avoid damaging any
components on the card, handle it by the
edges, using your thumbs to push it
securely into the PCI slot. Do not use
excessive force, but make sure the card
is fully inserted into the slot to prevent
the PC operating system from freezing at
startup.

When you boot up the Windows system
after installing the GA311 Gigabit
Ethernet Adapter, a Found New
Hardware Wizard dialog box appears,
indicating that Windows has found the
adapter. Click Next.

Insert the GA311 driver CD into your
CD-ROM drive.

The install hardware device drivers
dialog box appears. Select Search for a
suitable driver for your device
(Recommended). Click Next.

Found New Hardware Wizard

Search for a driver