1 important – Philips SE140 User Manual

Page 5

Important

1 Important

Take time to read this user
manual before you use your
telephone. It contains important
information and notes regarding
operating your telephone.

1.1 Power

requirements

• This product requires an

electrical supply of 220–240
volts, alternating monophased
power, excluding IT
installations defi ned in
standard EN 60-950. In
case of power failure, the
communication can be lost.

• The electrical network

is classifi ed as hazardous
according to criteria in the
standard EN 60-950. The
only way to power down
this product is to unplug the
power supply unit from the
electrical outlet. Ensure the
electrical outlet is located
close to the apparatus and is
always easily accessible.

• The voltage on the

network is classifi ed as
TNV-3 (Telecommunication
Network Voltages), as defi ned
in the standard EN 60-950.

Warning

• This equipment is not

designed to make emergency
calls in the event of a power
failure. An alternative has to
be made available to allow
emergency calls.

• High voltage. Never open

the product or attempt any
repair.

• Keep the product away

from liquid.

• Never use any battery type

other than the one supplied.
There is a risk of explosion if
the batteries are replaced by
an incorrect type.

• When the phone is ringing

avoid holding the earpiece
too close to your ear as it
may damage your hearing.

• Do not use the product

in places where there are
explosive hazards.

SE140_UK_IR_Index 2_Internet_08.10.07.indd Sec1:3

08.10.2007 11:39:49