Philips SE140 - Manual (Page 17)

15
Warning
If you insert alkaline batteries
instead of the NiMH batteries
all elements of the display will
appear. Replace immediately
with the batteries supplied.
3.4 Using multipacks
If you have purchased a
multipack you will have
additional handsets, chargers,
power adaptors and AAA
rechargeable batteries.
1 Plug the chargers into a
power socket.
2 Install the batteries supplied
into the other handsets.
3 Place the handsets on the
chargers to fully charge
the batteries for at least
24 hours.
4 Using your SE140
4.1 Make a call
1 Press .
2 Dial the telephone number.
4.2 Pre-dial
1 Enter the phone number
(maximum 24 digits). If you
make a mistake press
to delete incorrect digits.
2 Press to dial.
4.3 Dial one-touch
numbers 1 and 2
1 Press and hold or
until the number is
displayed and dialled. If no
number is stored, you hear
a beep.
4.4 Call from the
phonebook
1 Press .
The fi rst entry in the
phonebook is displayed.
Using your SE140
SE140_UK_IR_Index 2_Internet_08.10.07.indd Sec1:15 SE140_UK_IR_Index 2_Internet_08.10.07.indd Sec1:15 08.10.2007 11:39:52 08.10.2007 11:39:52