7 registration – Philips SE140 User Manual

Page 30

6.9 Lock the keypad
Prevent accidental dialling while
carrying the handset by locking
the keypad.

Press and hold

The keypad is locked and the
display shows

Note

You can still answer a call

by pressing

when the

keypad is locked. At the end
of the call, the keypad will
still be locked.

If you press a key while

the keypad is locked, the
handset displays

for 3 seconds.

6.10 Unlock the keypad

To unlock the keypad, press

and hold

again.

7 Registration

Up to 5 handsets can be
registered to one base.
Additional handsets must be
registered to the base before
you can use them.

Note

• The instructions described

below apply specifi cally to
your SE140 handset.
If you wish to register
another manufacturer’s
handset, the instructions
may vary. In this case, please
refer to the manufacturer
of the additional handset.

• The System PIN is required

before you can register or
unregister handsets. The
default PIN is 0000.

7.1 Register a handset

At the base, press and hold

for about 3 seconds.

Note

The base is able to accept

registration from a handset
within 90 seconds.

Registration

SE140_UK_IR_Index 2_Internet_08.10.07.indd Sec1:28

08.10.2007 11:39:58