Panasonic PT-AE1000U - Manual (Page 47)

Technical Information
E NGLISH - 47
Appendix
J Control commands
Command Control contents Remarks
PON Power ON
In standby mode, all commands other than the PON command are
ignored.
The PON command is ignored during lamp ON control.
POF Power OFF
If a PON command is received while the cooling fan is operating after
the lamp has switched off, the lamp is not turned back on again straight
away in order to protect the lamp.
IIS INPUT
Parameter: (page 23)
VID = VIDEO IN
RG1 = PC IN
CP2 = COMPONENT1 IN SVD = S-VIDEO IN
HD1 = HDMI1 IN
HD2 = HDMI2 IN
CP2 = COMPONENT2 IN
OMN MAIN Displaying Main menu
OEN ENTER Activating the selected items in menu mode.
OBK RETURN Returning to the previous menu or escaping from the menu mode.
OCU/OCD/
OCL/OCR
Navigation buttons
OCU = F button
OCD = G button OCL = I button
OCR = H button
OLE LENS CONTROL Activating the LENS CONTROL menu.
OST DEFAULT Resetting to the factory default setting. (page 22)
OFZ FREEZE
Freezing the projected screen.
Parameter:
0 = OFF
1 = ON
OOT SLEEP
Setting the duration of time to turn off the power automatically.
0 = OFF
1 = 60 min. 2 = 90 min. 3 = 120 min. 4 = 150 min.
5 = 180 min. 6 = 210 min. 7 = 240 min. (page 25)
OSH SHUTTER
Turning off the projection temporarily.
Send the command to switch between ON and OFF.
Do not send the command consecutively.
OVM PICTURE
Activating the PICTURE menu. Send the command to switch menu items.
(page 28)
OWM WAVEFORM
Activating the WAVEFORM.
Parameter:
0 = OFF
1 = FULL SCAN (Y)
2 = FULL SCAN (R)
3 = FULL SCAN (G)
4 = FULL SCAN (B)
(page 24)
5 = SINGLE LINE SCAN (Y)
6 = SINGLE LINE SCAN (R)
7 = SINGLE LINE SCAN (G)
8 = SINGLE LINE SCAN (B)
VS1 ASPECT Switch the aspect ratio. (page 23)
VPM PICTURE MODE
Parameter: (page 25)
NAT=COLOR1
DYN=DYNAMIC
CN2=CINEMA2
VID=COLOR2
NOR=NORMAL
CN1=CINEMA1
CN3=CINEMA3
PT-AE1000U.book Page 47 Monday, October 16, 2006 1:40 PM