beautypg.com

36 - e, Wss over scan keystone, Auto setup – Panasonic PT-AE1000U User Manual

Page 36: Position menu, Nglish, Enlarge shrink, Settings j aspect ratio depend on signals

background image

POSITION Menu

36 - E

NGLISH

Settings

J

Aspect ratio depend on signals

Press I H to cycle through the aspect ratio
options. The cycle pattern depends on the
connected signals.

WSS (Wide Screen Signalling) detects if a
PAL/625p (576p)/625i (576i) signal is input and that
signal has an identification signal, and switch the aspect
ratio to required setting automatically. You can switch
the system off manually.

If the 4 edges of an image is partly dropped, you can use
this function to adjust and project it properly.

Setting range: 0 to +10

OVER SCAN is not available with PC signals.

If the projector is aligned non-perpendicularly to the
screen, or if the projection screen has an angled
surface, you can vertically correct keystone.

Setting range: -32 to 32

You can adjust V - POSITION, H - POSITION, DOT
CLOCK
and CLOCK PHASE automatically when
connecting via PC. Press ENTER to adjust these at the
same time.

VIDEO/

S-VIDEO

4:3 \ 16:9 \ 14:9 \ JUST \
ZOOM1 \ ZOOM2

AUTO \ 4:3 \ 16:9 \ JUST \
ZOOM
NTSC signal

PC (RGB)

4:3 \ 16:9

4:3 \ 16:9
VGA or SVGA signals

Not switchable
WIDE480/600/720/768/768-2/800
/900 signals

HDMI

4:3 \ 16:9

16:9 \ H - FIT \ V - FIT \
ZOOM
1 125 (1 080)/50i,
1 125 (1 080)/60i,
1 125 (1 080)/50p,
1 125 (1 080)/60p,
1 125 (1 080)/24p, 750 (720)/50p
and 750 (720)/60p signals

4:3 \ 16:9 \ JUST \ ZOOM
525p (480p) and 625p (576p)
signals

COMPONENT

(YP

B

P

R

)

4:3 \ 16:9 \ 14:9 \ JUST \
ZOOM1 \ ZOOM2
625i (576i), 625p (576p)

AUTO \ 4:3 \ 16:9 \ JUST \
ZOOM
525i (480i), 525p (480p)

16:9 \ H - FIT \ V - FIT
1 125 (1 080)/50i,
1 125 (1 080)/60i,
1 125 (1 080)/50p,
1 125 (1 080)/60p,
1 125 (1 080)/24p, 750 (720)/50p,
750 (720)/60p signals

WSS

OVER SCAN

KEYSTONE

Image

Operation

NOTE:

You can correct the distortion ± 30 degrees from
the vertical plane. For a better quality image,
installing the projector with a minimum of
distortion is recommended.

Some distortion may be retained for Lens shift
adjustment.

The distortion of the Main menu screen is not
correctable.

The result of the keystone correction will affect the
aspect ratio and the size of the image.

AUTO SETUP

Enlarge

Shrink

PT-AE1000U.book Page 36 Monday, October 16, 2006 1:40 PM