Panasonic PT-AE1000U - Manual (Page 26)

Remote control operation
26 - E NGLISH
Basic Op
eratio
n
You can adjust a selected color individually
and save and retrieve under the PICTURE
MODE setting. Press the COLOR
MANAGEMENT button to open the menu.
J Create a new profile
Q Adjusting the selected color
Select a color and adjust COLOR, TINT and
BRIGHTNESS.
1. Select the CURSOR menu and press
ENTER.
The projected image is captured, and the target
cursor is displayed.
When the LOG is fully stored, the target cursor
will not be displayed. See "Managing stored
logs" on page 26.
2. Move the cursor with F G I H to the
required place to select a color and press
ENTER.
The color at the center of the target cursor is
sampled and the sample box is displayed on
the left of the cursor. The menu items are
displayed on the upper part of the screen.
3. Select a menu item and the I H to adjust
each item level.
The result box is displayed on the right of the
cursor and shows the adjusted color.
4. Press ENTER to store the adjusted result.
“PROCESSING” is displayed for a few seconds
and the result is stored in LOG.
You can store up to 8 logs under LOG for each
PICTURE MODE setting.
5. Press MENU or RETURN to return to the
previous menu.
Repeat the steps above to store more
adjustment.
Setting your own color profile
NORMAL
PROFILE SAVE
LOG
CURSOR
PROFILE
Target cursor
SELECT
CURSOR
RETURN
ENTER
DEFAULT
COLOR
TINT
BRIGHTNESS
Sampled color
COLOR
Adjust the vividness of the color.
Setting range: -30 to +30
TINT
Adjust the color tone.
Setting range: -30 to +30
BRIGHTNESS
Adjust the brightness of the color.
Setting range: -20 to +20
SELECT
CURSOR
RETURN
ENTER
DEFAULT
COLOR
TINT
BRIGHTNESS
Adjusted color
PT-AE1000U.book Page 26 Monday, October 16, 2006 1:40 PM