Panasonic PT-DW90XE - Manual (Page 90)

SIGNAL LIST menu
90
- ENGLISH
Settings
See “Navigating through the menu” z
( Æ page 50).
See “MAIN MENU” and “SUB MENU” z
( Æ page 51).
REGISTERED SIGNAL STATUS
J
The name can be set for each sub memory. z
MEMORY NO. : A1 (1-2) z
Registering a signal to the list
When a new format input signal is applied to the
projector, press
SIGNAL LIST.
Note
You can register data up to 96 in total number of the z
signal data and any corresponding sub memory data.
The memories are numbered over 12 pages (A to L: 8 z
data items can be registered on each page), and the
data is registered in the unused memory with the lowest
number. If all the memories are used, the data of the old
signals is overwritten in sequence.
The names of the registered data are automatically z
determined by the input signals and memory numbers.
If a menu is being displayed, the new signals will be z
registered at the instant they are input.
Renaming a registered data
Press ▲▼◄► to select the required 1 )
signal data.
Press button.
2 )
The [REGISTERED SIGNAL STATUS] screen z
will be displayed.
Displays the character list. z
Press z
[REGISTERED SIGNAL LIST] screen.
Press button. 3 )
The [RENAME] screen will be displayed. z
Press ▲▼◄► to select characters 4 )
and press button to input
them.
Press ▲▼◄► to select [OK], and
5 )
press button.
The [REGISTERED SIGNAL LIST] screen will z
be displayed.
Press ▲▼◄► to select [CANCEL] and press z
button to return to the [REGISTERED
SIGNAL LIST] without any change.
Deleting a registered data
Press ▲▼◄► to select the required 1 )
signal data.
Press button.
2 )
The [ENTRY SIGNAL CLEAR] screen will be z
displayed.
Press z
the [REGISTERED SIGNAL LIST] without any
change.
Press button. 3 )
Displays [REGISTERED SIGNAL LIST] and z
confirm the data is deleted.
Sub memory number
When the address number (A1, A2, …H7,
H8) signal is registered
SIGNAL LIST menu