Printronix SL5000e - Manual (Page 47)

Selecting The Tools
47
Error Messages
The RFID encoder can detect a number of errors. When one of
these errors occurs, the RFID encoder alerts the printer to perform
the currently selected error action (see “Error Handling” on
page 18) and display the appropriate error message on the control
panel’s LCD (see Table 2).
Table 2. Control Panel Error Messages
Error Message Explanation Solution
RFID MAX RETRY
Check System Error Handling = Overstrike in
the RFID CONTROL menu,
and the Label Retry count has
been exhausted. Press PAUSE to clear the
message.
See “Troubleshooting” on
page 48.
RFID Comm Err
Check Cable RFID error: communication
cannot be established with
the RFID encoder. Reader
will be set to Disable in the
RFID CONTROL menu and
the previous port settings
restored. Press PAUSE to clear the
message.
See “Troubleshooting” on
page 48.
RFID TAG FAILED
Check Media Error Handling = Stop in the
RFID CONTROL menu, and
the RFID encoder could not
read the RFID tag. Press PAUSE to clear the
message.
See “Troubleshooting” on
page 48.