Printronix SL5000e - Manual (Page 23)

Admin User Menu Items
23
When it is set to Enable, the RFID encoder uses the settings in the
custom tag menus, which must be set to match the characteristics
of the custom tag.
When it is set to Duplicate, the settings of the selected Tag Type
menu item are copied into the custom tag menus.
Custom Pwr Set
NOTE: To enable this menu item, set Custom Tag to Enable.
This menu item selects the power level to be used in the RFID
encoder. 1 is the lowest power level setting, and 20 is the highest.
The default is 5.
Custom Tag Len
NOTE: To enable this menu item, set Custom Tag to Enable.
This menu item selects the number of bytes in the tag.
The default is 8.
Custom Tag Class
NOTE: To enable this menu item, set Custom Tag to Enable.
This menu item selects the class of the custom tag. Class 1,
Class 0+, and Class 1.19 tags are read/write. Class 0 tags are read
only. The default is Class 1.
Print And Apply
This menu item enables the use of print and apply hardware.
The default is Disable.
EPC Mgr Report
This menu item enables EPC and label information to be sent out
the network port. This information can be used by an RFID tag data
and labels manager program. The default is Disable.