Printronix SL5000e - Manual (Page 24)

Chapter 2 RFID PGL Commands
24
RFID PGL Commands
IMPORTANT For all examples make sure Label Length in the QUICK SETUP
menu matches the physical length of the installed media.
RFWTAG
Purpose The RFWTAG command is used to program an RFID
tag (embedded in a smart label) using structured data
format. The data structure of an RFID tag can consist
of one or more bit fields. Each bit field specifies its own
field length, the data format, the field type plus
additional options if the type is incremental, and finally
the field value.
Mode CREATE
Format RFWTAG;[LOCKn;] size
( Bit Field)+
STOP
RFWTAG Specifies the RFWTAG command, enter
RFWTAG;
LOCK n Optional parameter specifies that the
data should be protected from being
overwritten later. By default the data are
not protected. The acceptable values for
n are 1 to 255, meaning the data are to
be protected using this byte as the LOCK
password.
size A decimal number specifying the overall
bit length of the RFID tag.
Bit Field A line description of a bit field and must
have one of the following syntax formats:
1. For non-incremental data (both static
and dynamic)
length;[DFn;]format;(D)datafield(D)
2. For incremental fixed data
length;I;format;STEP[idir]step;[RPTn;]
[RST
n;](D)startdata(D)