Smart label characteristics, General tag type, Technology tag type – Printronix SL5000e User Manual
Page 10: Label size, Inlay style
Chapter 1
What To Expect When Running Your RFID Application
10
Smart Label Characteristics
IMPORTANT
Purchase additional smart labels directly from Printronix to
assure the highest level of performance and reliability. See
“How To Order More Smart Labels” on page 12.
Currently supported smart labels have the following characteristics:
General Tag Type
•
UHF 915 MHz radio frequency
Technology Tag Type
•
EPC Class 0 tags – 64 data bits Read Only
•
EPC Class 0 tags – 96 data bits Read Only
•
EPC Class 0+ tags – 64 data bits Read/Write
•
EPC Class 0+ tags – 96 data bits Read/Write
NOTE: For Class 0+ tags, the AWID multi-protocol reader used by
Printronix enforces the EPC format in the following manner:
•
For 96–bit data, the two most significant bits must be 0.
•
For 64–bit data, the two most significant bits must be 1.
•
EPC Class 1 tags – 64 data bits Read/Write
•
EPC Class 1 tags – 96 data bits Read/Write
•
EPC Class 1.19 tags – 96 data bits Read/Write
Label Size
4 x 2, 4 x 4, 4 x 6, 4 x 8 inch label stock
Inlay Style
•
4 x 2, 4 x 4, 4 x 6, 4 x 8 inch label stock
•
Alien
®
Squiggle or M-Tag inlays
•
3 x 3 inch Rafsec
®
#313, #342, #450, #504
•
4 x 6 inch Matrics
®
X1020, X2020
•
Number of labels per roll will vary depending on the label length