Proxima ASA 4100/4200 - Manual (Page 56)

Cyclops F/X 4-1
Chapter 4
Cyclops F/X
Your projector comes with Cyclops F/X—software effects that you can use to
make your presentations more interesting and effective. For example, you
can use the Spotlight to call attention to specific areas on the image, use the
Zoom or Magnify effects to focus on important information in the image, or
use See-it/Show-it to preview images on your computer without distracting
your audience.
You can use
Cyclops F/X with either the remote that came with your
projector or the optional Cyclops interactive pointer system, or both at the
same time.
Note: Cyclops F/X is not available for UNIX systems.
Note: You cannot use Cyclops F/X with the MediaExpress system.
To use Cyclops F/X, follow these steps (details are covered throughout this
chapter):
1 Use the serial cable appropriate for your system (PCs: C936-6 or Macs:
C470-6) to connect the serial port on your computer to the CYCLOPS
port on the projector.
C Cyclops
Figure 4-1 Cyclops port on the projector
2 Install the Cyclops F/X software.
3 Start Cyclops F/X, customize the effects, and assign them to specific keys
on the keyboard or buttons on the remote control.
4 Minimize the Cyclops F/X main screen.
Then, just press the assigned key or button during your presentation to start
an effect.
This chapter is designed to give you a brief introduction to the
Cyclops F/X software.
Note: Updates to the Cyclops F/X software are available for download from
the World Wide Web at http://www.prxm.com.