Proxima ASA 4100/4200 - Manual (Page 23)

2-12 Chapter Two
To connect an S-video source:
1 Insert one end of the S-VIDEO cable into the mini-DIN Video Out port of
the video source device.
2 Insert the other end of the S-VIDEO cable into the projector’s S-VIDEO
port.
CONNECTING NON-COMPUTER AUDIO
The AUDIO ports allow the projector to receive stereo or monaural audio
inputs from a composite video source.
Audio Audio
Figure 2-16 Audio Input ports
For stereo audio, use the supplied AV cable.
1 Insert the red (right) and white (left) ends of the cable into the AUDIO
OUT ports of a composite video's audio source.
2 Connect the other end of each cable to the projector’s AUDIO ports.
NOTE: Although both COMPUTER AUDIO and AUDIO may be connected
simultaneously, only one can be active. If computer video is selected,
COMPUTER AUDIO is active. If NTSC/PAL/SECAM/S-Video video is being
viewed, AUDIO is active.
If your TV audio source outputs only monaural audio, your Desktop
Projector will provide simulated stereo audio. Connect the audio source to
the left AUDIO port.