Proxima ASA 4100/4200 - Manual (Page 39)

3-14 Chapter Three
THE GRAPHICAL USER INTERFACE
Your DP4100/4200 features a graphical user interface that makes it easy to
control all of the projector’s functions. Menu selections can be made with
the control panel, Cyclops remotes or pointer, or your computer mouse.
NOTE: Menus will change based on the type of video source you have
connected.
Using the Menus with the Control Panel or
Cyclops Remote
1 Press the MENU key to display the on-screen menus.
2 Press the ▲ and ▼ arrow keys to select the desired menu item. An item is
highlighted when it is selected.
3 Use the and arrow keys to move across the menus.
4 Use the ▲ and ▼ arrow keys to move down a menu column or to change
a menu value.
5 Press the MENU key again to close the menu or wait five seconds and
they will automatically disappear. Settings are automatically saved when
you exit the menus.
Menu Selection Using a Mouse
If a Microsoft-compatible mouse is connected to the projector’s AUX port,
menu selections are even easier. When the menus are open, simply point to
the desired item and click to select or change it.
Using the Menus with the Cyclops Interactive
Pointer System
For the ultimate in ease-of-use, you can use the optional Cyclops interactive
pointer system to control the menus and the LightBoard tool in Local Mode,
and the attached computer in Host Mode.
NOTE: You must first calibrate the Cyclops interactive pointer system.
• To open or close the menus, simply point the Cyclops wand or laser
pointer just to the left or right of the projected image and hold the button
down until the menus appear or disappear. As with a Microsoft-compatible
mouse, you can control the menus with a point and click.