Philips PV-GS55 - Manual (Page 20)

Before Use
-20-
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
≥Make sure the Card Slot Cover is closed.
ª Adjusting Brightness and Color Level
When [LCD/EVF SET] on the [LCD/EVF]
Sub-Menu is set to [YES], the following items are
displayed.
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD
screen.
LCD Color Level [LCD COLOR LEVEL]
Adjusts the color saturation of the image on the
LCD screen.
Brightness of the Viewfinder
[EVF BRIGHTNESS]
Adjusts the brightness of the image in the
Viewfinder.
To Adjust
Press the [
;/∫] Button and select the item to be
adjusted, and then press the [ 6/5] Button to
raise or lower the number of vertical bars in the
Bar Indication.
≥More vertical bars indicates stronger brightness
or color saturation.
To Increase the Brightness of the Entire LCD
Monitor
Press the [POWER LCD]
(27) Button.
When you press [POWER LCD] button, the LCD
monitor becomes about twice as bright as usual.
≥The [POWER LCD] Lamp (27) lights up.
≥When turning the power on while using AC
Adaptor, [POWER LCD] function is
automatically effective.
To Resume Normal Brightness
Press the [POWER LCD] Button again.
≥These adjustments do not affect the recorded
images.
≥For other notes concerning this item, see -72- .
290 o 1180 o
1LCD BRIGHTNESS
[-]||||----[+]
LCD COLOR LEVEL
[-]||||----[+]
EVF BRIGHTNESS
[-]||||----[+]
;/∫:SELECT &/%:SETUP
!/MENU:EXIT
LCD/EVF SETUP
POWER
LCD
(27)
Using the Menu Screen
To facilitate the selection of a desired function or
setup, this Palmcorder displays various function
setups on Menus.
≥When operating the menu with the Viewfinder,
set [LCD/EVF] >> [EVF ON/AUTO] >> [ON] or
rotate the LCD monitor by 180
o.
1 Press the [MENU] Button (18) .
≥The Menu corresponding to the Mode
selected by using the Mode Dial (43) is
displayed.
2 Press the [ ;/∫] Button to select a desired
Sub-Menu.
≥Press the [;/∫] Button to display the
highlighted item.
3 Press the [ 5] Button to display the
selected Sub-Menu.
4 Press the [ ;/∫] Button to select the item.
5 Press the [ 5] Button to display the
selected item.
6 Press the [ ;/∫] Button to select the desired
mode and press [ENTER] Button to
determine the setting.
≥While a Menu is displayed, you cannot record or
play back. Menus can be displayed during
playback but not during recording. The above
operations can be done using the [MENU]
Button, [
π, ∑, ∏, ∫] Buttons and [ENTER]
Button on the Remote Controller. ( -14- )
To Return the Previous Screen
Press the [
6] Button.
To Exit the Menu Screen
Press the [MENU] Button again.
About the Menu Mode Setting
The setting selected on the Menu will be retained
even when the Palmcorder is turned off. (The
setups of [EFFECT2] (
-35- ) are not retained.)
However, if the Battery or AC Adaptor is
disconnected before turning off the Palmcorder,
the selected setup may not be retained.
≥Menu operation flow is shown in this text by >>.
MENU
STILL
ENTER
FADE
i s
(18)
(43)
PC
S D
PV-GS55PP_Eng.book 20 ページ ２００４年２月１０日 火曜日 午前１１時５１分