Philips PV-GS55 - Manual (Page 17)

Before Use
-17-
The One-touch Free Style Grip Belt
ª To Use as a Grip Belt
Adjust the length of the Grip Belt to the size of
your hand.
1 Detach the end of the Grip Belt.
2 Adjust the length of the Grip Belt to the size
of your hand.
3 Reattach the Grip Belt.
ª To Use as a Hand Strap
Using the Grip Belt as the hand strap makes it
easier to handle and carry a Palmcorder. It is
more convenient to use with the Magic Wire
Remote Control with Narration Mic.
1 Open the Lock Cover (24) by holding the
tabs on both sides 1, press the Lock
Button (23) and detach the Grip Belt.
2 Detach the end of the Grip Belt.
3 Slide A in the direction of the arrow and
reattach the Grip Belt.
1
(23)
(24)
A
4 Attach the Grip Belt around your wrist.
≥When returning the Grip Belt to the Grip Belt
Attachment, press the Lock Cover 2 to ensure
that it is securely locked.
Attaching the Lens Cap
To protect the Lens surface, attach the Lens Cap.
1 Pass one end of the Lens Cap Cord through
the attached eye on the Lens Cap. Then
pass the other end through the loop made
by itself and pull tight.
2 Pass the end of the Lens Cap Cord through
the hole in the Grip Belt Attachment and the
Lens Cap through the Lens Cap Cord.
≥The removed Lens Cap can be hooked onto the
Grip Belt. (It is not possible when using as a
hand strap.)
≥When you are not recording, be sure to cover
the Lens with the Lens Cap for protection.
Attaching the Shoulder Strap
We recommend that you attach the Shoulder
Strap before going out to avoid dropping the
Palmcorder.
2
PV-GS55PP_Eng.book 17 ページ ２００４年２月１０日 火曜日 午前１１時５１分