Panasonic FT-LB10NTU - Manual (Page 51)

51
Note:
The connection status with the projector can be checked
by the link status. Click [More...].
Notes:
• The communication mode does not support AdHoc
mode. Select 802.11 AdHoc (Peer to Peer) or
Infrastructure (Access Point).
• Some cards other than the optional wireless card (ET-
CDWL3U or ET-CDWL2U) support only AdHoc mode.
These cards cannot be used.
• When using encryption (WEP), change the setting from
[Off] to [64 (40) bits] or [128 bits], then click [Next]. Set
to [Off] when not using encryption.
• WEP input can be selected from character input or
hexadecimal input.
Character input: 5 characters for 64 (40) bits, 13
characters for 128 bits
Hexadecimal input: 0 to 9 and A to F. 10 characters for 64
(40) bits, 26 characters for 128 bits
• Set the WEP key to match the projector side setting.
Leave the default key as “1”.
(6) Set [IP Setting] to [Disable], then click [Complete].
Using the ET-CDWL2U (Optional wireless card)
(cont.)