Panasonic FT-LB10NTU - Manual (Page 35)

35
Windows 2000/Me/98SE:
(1) Double-click the permanent icon at the lower right of
the computer screen.
The utility software starts up.
(2) Click [Profile].
(3) Enter the network name and the SSID of the projector
to be connected (default network [USER] setting:
Panasonic Projector).
(4) Select the communication mode of the projector to be
connected (default network [USER] setting: Peer-to-
Peer), and set the transfer rate (Tx Rate) to [Full
Automatic].
Leave the Channel Setting (Channel) to default.
(5) If encryption (WEP) has been set in the projector,
click the encryption setting (Encryption).
Other Applications (Changing the Initial Settings)
(cont.)
(Continued on next page)
Note:
Do not use the utility software during simple connection, as this may cause a
problem in connection with the projector.