Panasonic KX-FLB881 - Manual (Page 57)

9. Programmable Features
57
9.4 Copy features
Feature/Code Selection
Changing the default copy
resolution
{#}{
4}{6}{1}
To change the default resolution setting for copying.
{
1} “ TEXT/PHOTO”: For documents containing both text and photographs.
{ 2} “ TEXT” (default): For documents containing only text.
{ 3} “ PHOTO”: For documents containing photographs, shaded drawings, etc.
Setting the output tray to use
for copying
{#}{
4}{6}{6}
You can select the output tray that will be used for copying.
{
1} “ #1” (default): Upper output tray (Up to approx. 100 sheets)
{ 2} “ #2”: Lower output tray (Up to approx. 50 sheets)
Holding the previous page
layout setting
{#}{
4}{6}{7}
{ 0} “ DISABLED” (default): Deactivates this feature.
{ 1} “ ENABLED”: The unit will hold the previous setting.
Holding the previous zoom
(enlargement / reduction)
setting
{#}{
4}{6}{8}
{ 0} “ DISABLED” (default): Deactivates this feature.
{ 1} “ ENABLED”: The unit will hold the previous setting.
Holding the previous collate
setting
{#}{
4}{6}{9}
{ 0} “ DISABLED” (default): Deactivates this feature.
{ 1} “ ENABLED”: The unit will hold the previous setting.
FLB881-PFQX2732ZA-OI-en.book Page 57 Wednesday, July 18, 2007 11:22 PM