Panasonic KX-FLB881 - Manual (Page 13)

1. Introduction and Installation
13 For assistance, please visit http://www.panasonic.com/help
2. Slide the other tab ( 1) into the right hole (2) of the
extender from below until it clicks into place.
If the extender is detached
1. Line up the extender (
1) underneath the output tray
( 2), and insert the left side of the extender into the
output tray.
2. Attach the extender (
1) by bending the side of the
output tray downward slightly and pressing the right
side of the extender.
1.8 Recording paper
The paper input tray unit can hold:
–
Up to 250 sheets of 60 g/m 2 to 75 g/m 2 (16 lb. to 20
lb.) paper.
– Up to 230 sheets of 80 g/m
2
(21 lb.) paper.
– Up to 200 sheets of 90 g/m 2 (24 lb.) paper.
L Please refer to page 89 for information on recording
paper.
L The unit is set for printing letter size paper by
default. If you want to use A4 or legal size paper,
change the setting (feature #380 on page 52).
1 Pull the paper input tray ( 1) completely out.
2 Pinch the front side of the recording paper guide
(
1), then slide it to match the paper size mark.
Pinch both sides of the recording paper guides ( 2),
then slide them to match the paper size mark.
1
2
1
2
1
1
1
LT R
LGL
A4
A4 LT R
LGL
2
2
FLB881-PFQX2732ZA-OI-en.book Page 13 Wednesday, July 18, 2007 11:22 PM