Panasonic KX-PS8000 - Manual (Page 52)

ID No.
■ Setting the SCSI ID Number
In most cases, there is no need to change the default settings.
However, if you have other peripheral devices connected in a SCSI chain, check if
their ID numbers conflict with that of the printer or scanner. Be sure to choose an
unassigned ID number.
ID number can be changed by using the SCSI ID No. switches (#1, #2, #3) [ ☞ Table
1 below].
Table 1
■ Setting the Terminator
The terminator setting can be changed by using the terminator switch (#4).
Terminator ON:
Terminator OFF:
SCSI ID No. switches
52
#3
Setup
Setting the SCSI ID Number, Terminator
0
1
2
3
4
5
6
7
#1
OFF
ON
OFF
ON
OFF
ON
OFF
ON
#2
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
OFF
OFF
ON
ON
ON
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
SCSI ID No. switches
Terminator switch