Panasonic KX-PS8000 - Manual (Page 51)

51
Setup
■ Using a parallel interface cable:
If you do not have a parallel interface cable, you will need to purchase one from your
local computer store or dealer
( ☞ P. 158 for “Parallel Interface” specifications) .
Make sure the computer, printer and the other connected
peripheral devices are turned off.
Connect the parallel interface cable to the computer’s parallel
interface connector and the printer’s parallel interface connector.
Notes:
B The actual connector on the computer may differ depending on the
manufacturer of the computer.
B If the cable is connected to the PC via a printer buffer or selector, the printer
may not print.
Connect the power cord to the printer’s AC inlet and to an AC
outlet.
1
2
3
Computer’s parallel
interface connector