Panasonic KX-PS8000 - Manual (Page 46)

46
Setup
Make sure the scanner and printer are turned off.
Connect the SCSI cable provided to the scanner’s SCSI
connector A or B and to the printer’s SCSI connector.
Make sure the terminator switches (#4) of the scanner and printer
are set to ON.
B
To change a terminator setting, refer to page 52 .
Connect the power cord to the scanner’s AC inlet and to an AC
outlet.
Connect the other power cord to the printer’s AC inlet and to an
AC outlet.
1
2
3
4
5
DCIS Stand Alone System
1 2 3 4
ON
12
3
4
ON
Scanner Printer