Pioneer DV-05 - Manual (Page 31)

31
Preparation
Basic
Operation
Setup
Other
Information
Detailed
Operation
Setup
Basic
Operation
Preparation
MAIN
3. INITIAL SETUP 4. OUTPUT 2. MENU 1. TITLE MENU
4. PARENTAL 5. DVD LANG. 6. LANG SET 7. ASPECT 1. DIGITAL OUTPUT 1. OSD SET. 3. B. G. COLOR 2. SCRN SAVER
Changing Settings
1. OSD SET.
Changing Settings
1. DISPLAY: Operation displays (play, stop etc.) can be displayed or not displayed by selecting
ON or OFF.
Settings: ON* (Operation displays appear.)
OFF (Operation displays do not appear.)
2. POSITION: When watching conventional software on a wide screen TV, the operation display
is right at the top of the screen, and you may not be able to see it at all. Changing
the position of the display lets you see operation indications clearly even on a wide
TV screen.
Settings: NORMAL* (When using a conventional (4:3) TV)
WIDE (When using a wide screen TV (not for menu displays))
3. LANGUAGE: This setting is used to display operation indicators and menu screens is the setup
to switch the language you desire.
Settings: English*
Select the language you desire with the direction buttons and press the
ENTER button.
4. ANGLE MARK: When a picture that is recorded in different angles is played back, will be
displayed.
This setting lets you see clearly whether the playback picture is recorded with
angles or not.
Settings: ON* ( is displayed.)
OFF (Not displayed.)
Place the disc on the disc table and press the MENU button during stop mode.
÷ The main menu screen will be displayed.
÷ The menu screen for a CD or Video CD will differ from the one shown on the right.
Select settings in SETUP of the main menu screen on the right.
How to go to the various menus is shown in
the following outline.
÷ After settings have been changed, to return all modes to their initial settings, set the power to the standby mode, and,
while pressing and holding the main unit’s STOP button, press the STANDBY/ON switch. “Picture quality/Tone setup”,
Condition Memory”, “Last Memory” and the code number of "Parental level" settings will also be erased.
MAIN
SETUP
1 TITLE MENU
2 MENU
3 INITIAL
4 OUTPUT
STOP
MENU ENTER EXIT ENTER RETURN
STOP
MAIN
SET UP
1/2
OSD SET.
1 DISPLAY
2 POSITION
3 LANGUAGE
4 ANGLE MARK
DISPLAY
ON
MENU ENTER EXIT NEXT ENTER RETURN
INITIAL SETUP
OSD SET., SCREEEN SAVER, B.G. COLOR, PARENTAL, DVD LANG., LANG SET., and ASPECT setup is possible.
÷ In each setting explanation, the setup mode first explained is the initial factory setting. (* is marked.)