Panasonic PT-DZ12000E - Manual (Page 57)

ENGLISH – 57
Basic Operation
Press
◄► to switch “SYSTEM
3.
DAYLIGHT VIEW”.
The setting will change as follows each time •
◄► is pressed.
3 (High)
OFF (No correction)
2 (Medium)
1 (Low)
Sharpness setting
This adjusts the sharpness of the pictures.
Press
▲▼ to select
1.
“SHARPNESS”.
SYSTEM DAYLIGHT VIEW
SHARPNESS
NOISE REDUCTION
OFF
0
OFF
Press
◄► or ENTER.
2.
The “SHARPNESS” individual adjustment •
screen will be displayed.
SHARPNESS
ADJUST
0
Press
◄► to adjust the level.
3.
Operation Adjustment
Adjustment
range
Press ►
button. Contours become
sharper.
0 to 15
Press ◄
button. Contours become
softer.
Note
The possible setting range will vary depending on •
the input signal.
Noise reduction setting
This can be used to adjust pictures if they contain
interference as a result of poor quality of the input
signal.
Press
▲▼ to select “NOISE
1.
REDUCTION”.
SHARPNESS
NOISE REDUCTION
DYNAMIC IRIS
0
OFF
OFF
Press
◄► or ENTER.
2.
The “NOISE REDUCTION” individual •
adjustment screen will be displayed.
NOISE REDUCTION
CHANGE
OFF
Press
◄► to switch “NOISE
3.
REDUCTION”.
The setting will change as follows each time •
◄► is pressed.
2 (Medium)
1 (Low)
3 (High)
OFF (No correction)
Note
When “FRAME DELAY” is set to “SHORT”, the •
noise reduction setting function cannot be used.
Dynamic iris setting
Pictures with the optimum contrast will be displayed
by automatically providing aperture compensation
and signal compensation to suit the pictures
concerned.
Press
▲▼ to select “DYNAMIC
1.
IRIS”.
NOISE REDUCTION
DYNAMIC IRIS
SYSTEM SELECTOR
OFF
OFF
AUTO1
Press
◄► or ENTER.
2.
The “DYNAMIC IRIS” individual adjustment •
screen will be displayed.
DYNAMIC IRIS
CHANGE
OFF
Press
◄► to switch “DYNAMIC
3.
IRIS”.
The setting will change as follows each time •
◄► is pressed.
2 (Intermediate)
1 (Low)
USER 3 (High)
OFF (No correction)
To further adjust the selected
„
compensation amount
Select “USER” in step 3. 4.
Press ENTER. 5.
The “DYNAMIC IRIS” screen will be displayed. •
DYNAMIC IRIS
AUTO IRIS
MANUAL IRIS
DYNAMIC GAMMA
OFF
OFF
OFF
Use
▲▼ to select the item to be
6.
adjusted, and then use
◄► to
adjust the amount of correction.