Panasonic PT-DZ12000E - Manual (Page 16)

16 – ENGLISH
Location and function of each part (continued)
1 REMOTE1 lN/OUT terminal
(p. 18)
When two or more main units are used in the
system, they can be connected and controlled
with a wired remote control cable (M3 jack).
2 REMOTE2 IN terminal
(p. 110)
The user can remotely control the main unit by
using an external control circuit to this terminal
(D-SUB 9-pin female).
3 SERIAL IN terminal
(pp. 28-29, 80, 106-109)
This terminal is an RS-232C compliant input
terminal (switching necessary) to connect a PC
and to externally control the main unit (D-SUB
9-pin female).
4 SERIAL IN terminal
(pp. 28-29, 80, 106-109)
This terminal is an RS-422 compliant input
terminal (switching necessary) to connect a PC
and to externally control the main unit (D-SUB
9-pin female).
5 SERIAL OUT terminal
(pp. 29, 106-109)
This terminal is an RS-422 compliant output
terminal (switching necessary) to supply signals
given to the serial input terminal (D-SUB 9-pin
male).
6 LAN terminal (10BASE-T/100BASE-TX)
(pp. 28-29, 93)
This terminal is used for connecting a LAN cable.
7 VIDEO IN terminal
(p. 28)
An input terminal for video signals. (BNC)
8 VIDEO OUT terminal
(p. 28)
An output terminal (active through) for video
signals. (BNC)
9 S-VIDEO IN terminal
(p. 28)
An input terminal for S-video signals (Mini DIN
4-pin). This terminal complies with S1 signals
and automatically toggles between 16:9 and 4:3
according to the size of input signals.
j RGB (YP
B
P
R
) 1 IN terminal (pp. 28, 29)
A terminal to input RGB or YP
B
P
R
signals (BNC).
k RGB2 IN terminal
(p. 29)
A terminal to input RGB or YP
B
P
R
signals (D-SUB
15-pin female).
l DVI-D IN terminal
(pp. 28, 29)
An input terminal for DVI-D signals.
Connection terminals
„
1
7
2
8 9 j k l
3 4 5 6