Pentax K200D - Manual (Page 43)

41
Getting Started
2
Inserting/Removing the SD Memory
Card
This camera uses either an SD Memory Card or an SDHC Memory Card. (Both
cards are referred to as SD Memory Cards hereafter.) Make sure the camera is
turned off before inserting or removing the SD Memory Card (market product).
1
Slide the card cover in the
direction of the arrow (1) and
then lift open (2).
2
Insert the card all the way with
the SD Memory Card label
toward the monitor.
Push the SD Memory Card in once to
remove.
3
Close the card cover (1) and
then slide it in the direction of
the arrow (2).
• Do not remove the SD Memory Card while the card access lamp is lit.
• Use this camera to format (initialize) an SD Memory Card that is unused or
has been used on other cameras or digital devices. Refer to “Formatting the
SD Memory Card” (p.203) for details on formatting.
Be sure to fully close the card cover. The
camera will not turn on if the card cover is
open.
2
1
2
1