Pentax K200D - Manual (Page 242)

240
Appendix
12
Error Messages
Error Message Description
Memory card full
The SD Memory Card is full and no more images
can be saved. Insert a new SD Memory Card or
delete unwanted images. (p.41, p.72)
You may be able to save new images by
converting to JPEG format or changing the JPEG
record pixels or JPEG quality setting. (p.146,
p.147)
No image
There are no images for playback on the SD
Memory Card.
Camera cannot display
this image
You are trying to play back an image in a format
not supported by this camera. You may be able
to play it back on another brand of camera or
your computer.
No card in the camera
The SD Memory Card is not inserted in the
camera. (p.41)
Memory card error
The SD Memory Card has a problem, and image
capture and playback are impossible. It may be
viewable on a PC but not with this camera.
Card not formatted
The SD Memory Card you have inserted is
unformatted or has been formatted on a
computer or other device and is not compatible
with this camera. Use the card after formatting it
with this camera. (p.203)
Card locked
A locked SD Memory Card is inserted in the
camera. Unlock the SD Memory Card. (p.42)
The card is
electronically locked
Data is protected by the SD Memory Card
security feature.
This image cannot be
enlarged
You are trying to enlarge an image that cannot be
enlarged.
This image is protected
You are trying to delete an image that is
protected. Remove protection from the image.
(p.177)
Battery depleted
The batteries are exhausted. Install new
batteries in the camera. (p.37)
Not enough battery
remaining
to clean sensor
Appears during sensor cleaning if the battery
level is insufficient. Replace the batteries with
new ones or use an AC adaptor D-AC76
(optional). (p.40)